Publicidad
Idiomas disponibles
Idiomas disponibles
The control unit is the central power station for your KLOUD . You can conveniently transport
the complete applicator including the control unit and use it at different locations.
Make sure that the control unit (headboard) is not exposed to strong vibrations and stress.
Do not stand on the head unit!
Next to the keyboard, there are ventilation slots that serve to cool the computer unit.
Never cover these slots!
The applicators are switched on and off by a mechanical push button.
We recommend using the CENTROPIX App to control the applicators to maintain all
functions and the full comfort of the KLOUD
Privacy
The use of the devices and the app are subject to the strict data protection laws of
the EU/USA. No personal data will be collected, recorded, or passed on.
11
applicators.
Regulation of the magnetic field intensity
Start the desired program. Check the set intensity by pressing and holding the
start-stop button
. After approx. 2 seconds the LEDs from P1 to P5 indicate the
intensity. Continue to hold the start-stop key and use the Program Select key
gradually select the desired intensity:
Powered by
Maximum
High
Medium
Low
Minimal
(Default)
Thus, the intensity applies to all selected programs until it is changed
again (remains even after the device is switched off).
After releasing the start-stop button
, the display is back in standard mode
and the selected program continues.
Powered by
This control function is, of course, also possible via the app.
Character Explanations
FCC-compliant USA
CE-compliant EU
to
Note
User manual
Powered by
Manufacturer
Do not iron
Do not wash
Do not tumble dry
Do not dry clean
Disposal not in household waste
Recyclable
RoHS compliant
Battery charging
Battery empty
Caution / Attention
Correct
Incorrect
Direct current
12
Publicidad
