Publicidad
PRECAUTIONS FOR USE
• Ensure that you use your powerbank with a product with a lower amperage than the maximum
nominal output power of the powerbank. For example, if the powerbank has a maximum nominal
output power of 2 amperes, then it must not be used with heated products with an amperage of
more than 2 amperes. Please check the amperage of your products before plugging the heated
sleeping bag into the powerbank. Failing to follow this instruction could overheat the powerbank or
the sleeping bag and cause damage.
• The recommended 50% power setting is sufficient for temperatures of approximately 10°- 20°C,
while in the case of lower and more extreme temperatures, adjusting the power to 75% or 100%
will provide additional heat. It is not recommended to use the 100% setting for a prolonged period,
because this could cause overheating and/or bodily discomfort.
POWERBANK 5 V 10,000 MAH
• Type of battery: lithium polymer
• Capacity: 10,000 mah / 37 wh
• Input: 5 v / 2 a (max.)
DISCOVER YOUR POWERBANK
POWER button
INSTRUCTIONS FOR USE
• To achieve a full charge, please use the USB cable supplied to charge your powerbank 10,000 mAh
for approximately 6 hours.
• The LED power indicator lights indicate the lifespan and status of the powerbank charge.
LED POWER INDICATOR LIGHTS:
1 LED: 50 % POWER SUPPLY
2 LEDs: 50-70 % POWER SUPPLY
• Output: 5 v / 2 a (max.)
• Output capacity: 10 w (max.)
• Load resistance: 3 Ω-200 Ω-
Indicator lights
USB Output port 5V/2A
Input port Type-C 5V/2A
USB Output port 5V/2A
3 LEDs: 70-90 % POWER SUPPLY
4 LEDs: 90-100 % POWER SUPPLY
8
• Rechargeable powerbank 10,000 mAh with double USB
• The output ports allow you to charge and power more than one device at a time. To achieve this,
turn on the powerbank and use a USB cable to connect and charge your USB compatible devices.
• To power your heated sleeping bag, connect your powerbank to the USB cable in the power sup-
ply pocket concealed in the heated sleeping bag. Press and hold the temperature control button
on the heated sleeping bag for 3-5 seconds until the LED indicator lights turn RED.
• Then use the control button to select your desired heat level.
HOW TO CHARGE YOUR POWERBANK
• Use the USB cable supplied to recharge your powerbank via a wall socket or a computer's USB port.
• It will take approximately 6 hours to fully charge.
HOW TO CHARGE OTHER DEVICES
Connect your compatible device to one of the USB ports, then turn on the powerbank to charge
your device.
HOW TO POWER YOU HEATED SLEEPING BAG
• For greater comfort, we recommend that you pre-heat your heated sleeping bag for a while before use.
• Connect your powerbank to the USB cable in the power supply pocket concealed in the heated
sleeping bag.
• Press and hold the temperature control button on the heated sleeping bag for 3-5 seconds until
the LED indicator lights turn RED. Then use the control button to select your desired heat level.
LED indicator light settings on the temperature
control button:
GREY = OFF
RED: heating 100%
WHITE: heating 70%
BLUE: heating 40%
9
Publicidad
