Publicidad
Adding a new HD Smart Wi-Fi Camera:
1.
Turn on Wi-Fi of your phone, and then connect to the local/home network.
2.
Power on the camera: Connect the USB power cable.
3.
Wait for about 20 seconds until you hear the startup sound, then wait until you hear a
voice prompt 'wait for wifi config".
[Note: If reset is required, use the reset pin to press the Reset button on top of the
camere for several seconds until the camera starts to beep.]
4.
Turn on the "Smart Life" App, click '+' in the upper right corner, select 'Add Device' and
then 'Cameras and Locks' and finally select 'Smart wifi Camera' to add a new Smart
Wi-Fi Camera on your App.
SMART ROTATING WIFI CAMERA, E27, 1080P
GEMBIRD EUROPE B.V.
All brands and logos are registered trademarks of their respective owners
TSL-CAM-WRHD-01
http://www.gembird.eu
7
Publicidad
