Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1. Take the Tablet and look for the slot to insert the
micro-SD and nano-SIM cards on bottom side. Once
located, use the card removal tool and insert it into the
hole. The tray will be ejected slightly.
2. Once the tray is fully pulled out, put the nano-SIM
and micro-SD cards in their place as shown in the
image. Turn the tray back up, making sure that it is
fully inserted.
3. Place the Tablet on the base making sure that the USB
'Type C' is well connected.
4. Take the stand and place it back in the base, so that
the two tabs are inserted into the two existing slots.
Remember that the base has two possible positions.
Position (1) will allow you a more vertical view of the
equipment, ideal for video conferences. Position (2)
will provide you with a horizontal position of the device,
ideal for continuous keyboard interaction. Choose the
most comfortable position for each situation.
5. Connect the curled handset cord into the base.
Connect the longest end cable on the base and the
other part to the handset. Connect the short end of
the curly cord to the connector on the handset.
6. Connect the power supply cable to the connector
on the lateral side of the device and then plug power
supply into a household AC power outlet.
26
| (EN) Quick guide
S D
(2)
(1)
Publicidad
