Publicidad
Idiomas disponibles
Idiomas disponibles
2. Rotate the thermostat regulator clockwise to the MAX position, then
rotate the power switch regulator from 0 (OFF) to (fan) to turn the
wind-motor on and check if it runs normally.
3. Rotate the power switch regulator from (fan) to I (low) or II (high) to
choose the desired power: I (low) for 1200W and II (high) for 2000W.
4. When the desired temperature is reached, rotate the thermostat
regulator counter-clockwise until the pilot light goes off. Like this, the
desired temperature will be constantly kept by the thermostat.
5. Touch the "OSC" icon if you want the unit to swing.
2.3. Maintenance
1. Always remove the plug from the outlet and allow the heater to cool
down before cleaning it.
2. Wipe the Heater's outer surface occasionally with a soft dry cloth.
WARNING:
Do not immerse the heater in water.
Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the heater's interior to get wet as this could create a hazard.
3. Accumulated dust may be removed from the heater with a soft dry cloth.
4. To store the heater away, put it back into its original package and
store it in a clean dry place.
5. In case of malfunction or when in doubt, do not try to repair the
heater by yourself, as this may result in a fire hazard or electric shock.
Take it to the Customer Support Service.
Ceramic Fan Heater | Calefactor Cerámico | Termoventilador Cerâmico
AF Manual_termoventilator_BCTH3344_21917.indd 9
EN
9
04/10/2017 16:46
Publicidad
