König Electronic DVB-S2 REC10 Manual De Uso página 8

Main menu
Games
REC
Single Satellite Search
1. Satellite: Press the
drop-down list toselect the desired satellite. Press the OK key to confirm.
2. FTA Only: Press the
3. Scan Channel: Press the
4. Network Search: Select No or Yes. This item turns grey when Auto Scan is selected in the
following Scan mode item.
5. Scan Mode: Press the
a blind scan, while Preset Scan searches for preset frequencies.
6. Search: Press the OK key to start searching.
Factory Settings
Press the OK key to enter the Factory Settings window.
Select the Yes button and press the OK key to return to the factory settings. All searched channels
and set information will be erased.
Select the No button and press the OK key to cancel this operation. Press the MENU or EXIT key to
cancel and exit.
Upgrade by USB
1. Upgrade File: Show the Upgrade File.
2. Upgrade Mode: Select between allcode, maincode, defaultdb, userdb and Dump. When switching
the upgrade mode, "Upgrade File" will show the corresponding file according to the table below:
Select the upgrade mode and upgrade file tostart the upgrade by USB.
3. Press the OK key on the start button to start receiving data from the USB device. When the USB
device is not connected, this item is grey and you cannot edit it at this moment.
Sub menu
Othello
Media Player
PVR Storage Information
PVR Setting
Remove USB device safely
keys to select the circled satellite. Or press the OK key to open the
keys to select between Yes and No.
keys to select between TV+Radio, TV Channel and Radio.
keys to select between Auto Scan and Preset Scan. Auto Scan is
Upgrade Mode
All code: File named as "*.abs"
Main Code: File named as "*.abs"
Userdb: File named as "*.abs", the
picture will be used as
both radio back and menu
back
Default db: File named as "*.abs"
8
Sudoku
File feature