Ametek CREAFORM peel 3 Manual Del Usuario página 14

Cleaning
CAUTION:
Risk of injury
Never tamper with any product of Creaform. Always refer to qualified personnel at
Customer Support.
1. Unplug the scanner from the wall outlet before cleaning.
2. To clean the device's non-optical surfaces, use a soft cotton cloth with a small amount of water or
a soapy solution. Do not use solvent to clean the device. Do not use soap or solvent on the
optical parts of the device (lenses, lights).
3. Spray dry air to remove any particles that may scratch before cleaning the camera lenses and
lights with a damp cloth such as a non-abrasive optical towel or a microfiber cloth.
Never use chemically treated cloths, moistened disposable wipes or volatile
solvents such as paint thinner.
Do not use liquid or spray aerosol cleaners.
Opening or modifying the scanner will result in loss of warranty.
peel 3 User Manual version p3d-2203-001 (last update: 2022-09-13)
Page 13 of 23