Beper P206ZAN250 Manual De Instrucciones página 7

Rechargeable electric fly swatter Use instructions
For the safety of children and pets, remove and dispose of all
packaging material before use.
This appliance is intended for home use only, as described in this
manual. Any other use is to be considered improper and, therefore,
dangerous.
Do not use in the presence of explosive or flammable gases and
dusts.
Do not touch the metal grid with fingers or metal objects, to avoid
electric shocks and bruises caused by high voltage current.
Do not let the appliance operate without surveillance.
Description of product Fig.A
1. High voltage grid
2. Operation LED indicator
3. Charging LED indicator
4. High voltage grid activation key
5. Operation mode selection key
6. USB cable inlet
7. Standing base
8. USB cable
Charging of battery
Before first use, it is advisable to charge the battery fully. Insert the USB cable in the cable inlet and connect
the appliance to a charging device or to a wall socket via a USB adapter (not provided).
Charging LED indicator turns red; once battery is fully charged, the LED indicator will turn green; remove the
USB cable.
Both cord and cordless operation are available for this appliance.
Operation
Place the operation mode selection key on the desired mode:
ON1 – the gridi s only activated by pressing the high voltage grid activation key; when this key is pressed, the
operation LED indicator turns red
ON2 – ultraviolet LED lights turn on and the high voltage grid activates, and will remain on until the switching
off of the appliance: in this mode, the appliance must be inserted on its standing base
OFF – the gridi s off.
Cleaning and maintenance
Make sure that the appliance is off and disconnected from the wall socket before carrying out any cleaning
operation.
Remove dust and stains from the handle and the base with a soft cloth, slightly dampened.
To clean the grid, it is advisable to use compressed air.
Warning! Do not immerse the appliance and/or the grid in water or other liquids: do not clean the
appliance and/or the grid under running water; do not spray water or other liquids directly on the
grid and/or the appliance.
Do not use abrasive detergents and/or solvents.
7
EN