Coop LUA 3inONE Manual De Instrucciones página 7

3.2 Charging your LUA 3inONE
To charge the product follow the steps below:
⚫
Step 1: Use a Power supply with a maximum output rating of 5V, or connect to your charger or
laptop. *Image 2
⚫
Step 2: Open the cap from the charging port and insert the type C plug of the USB cable. *Image
1
⚫
Step 3: The charge indicator light turns red when charging and turns green after fully charged.
⚫
Step 4: Cover the cap when finished charging.
Remark: Charge the product for at least 8 hours.
3.3 Turn your LUA 3inONE On and Off
Step 1: ON - Short-press the ON/OFF button on the speaker bottom. The light and connectivity will
turn on automatically.
The speaker is now visible to your smartphone (or tablet, etc.).
Step 2: OFF - Short-press the ON/OFF button on the speaker bottom again. The light and connectivity
will turn off automatically. Only after you press the button on the speaker the speaker is truly turned
off.
Setting the switch-off timer
You can set the switch-off timer so the LUA switches off automatically after a certain time. To activate
the switch-off timer, press the TIME button. The light colour initially changes to red and the switch-off
timer is set to 30 minutes. Each additional press of the TIME button increases the switch-off time by
selecting the following light colours and corresponding switch-off times: Red › 30m, Green › 60m,
Blue › 90m, Yellow › 120m, Light blue › 150m, Pink › 180m.
The switch-off timer can only be deactivated if you press the On/Off switch on the bottom side of the
product and thus switch off the LUA.
3.4 Stream music with wireless connection
3.4.1 Unit to play music
After turning on the speaker and activating the pairing function via the remote control, start the
connecting function on your mobile device and select " Lua 3inONE " on your list of available devices.
You will hear another beep once the device is connected.
Play music on your smartphone and control the playback, volume and light effects using the speaker
remote control.
3.4.2 Pair to play music
In case you purchase multiple Lua 3inONE products, they can be paired.
1. First time to pair 2 speakers
Long-press ON/OFF button from any one of the 2 speakers, the speaker which you chose for long-
press will become the master one and the other one will be vice. (You can hear both of them beep at
the same time, it means that the pairing has been successful).
Start the pairing function on your mobile device and select "Lua 3inONE" on your smartphone's list of
available devices. You will hear another beep once the devices are connected.
2. Second time to pair 2 speakers (Memory function for master and vice)
Turn on 2 speakers, they will pair themselves automatically as they were already paired before. The
master and vice speaker will stay identical to the settings of the first time they were paired.
6