Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
•
To turn off your unit, press and hold the power button for 3 seconds. The unit will beep,
and the power indicator will turn off to indicate that the unit is off.
Dry ironing
•
To dry iron without steam, turn the thermostat knob and set it between the
position, depending on the type of fabric. For best results, wait for the heating indicator
light to turn off. Do not press the steam control.
Steam ironing
•
To steam iron, turn the thermostat knob and set it between the MAX and
depending on the type of fabric. Select your level of steam flow. Wait for the heating
indicator light to turn off before starting to iron. Remember to press the steam control
to use this function.
Note: The boiler pressure increases according to the selected steam flow level.
The selected steam flow indicator light flashes whilst heating up, then remains
steadily lit when the boiler is ready.
A few drops of water may drip from the soleplate when the station is switched on.
This is due to any steam condensation that has accumulated inside the steam cable
after your previous use. Simply hold the iron over an old rag and press the steam
control until the station generates steam. During use, if you notice any particles
escaping from the soleplate, we recommend descaling the boiler.
Vertical steam
•
Set the thermostat to MAX and then vertically position the iron in such a way that it is
facing the garment, then press the steam control for 10 second intervals.
Steam boost function
•
Turn the thermostat knob and set it between the MAX and
the type of fabric. Select your level of steam flow. Wait for the heating indicator light to
turn off before starting to iron. Double-press the steam control to activate this function.
Note: You must wait 15 seconds between each double press of the button.
Automatic shutdown of the station
•
If the station is not used for a period of 10 minutes, then the unit will beep and switch off
automatically. Press the power button to turn your steam station back on again.
Station shutdown and storage
•
Turn your iron's thermostat knob to the MIN position. Place your iron on its iron rest,
then lock it into position. Press and hold the power button for 3 seconds to switch off the
station. Unplug the station and let it fully cool down before putting it away.
•
Wind the power cable and the steam cable around the station, making sure that each
cable fits into the cable storage space.
20
EN
and MAX
position,
position, depending on
Publicidad
