Instruction manual
Timer and Stopwatch
Cat. No. 38.2010
For your safety:
Keep this instrument and the battery out of the reach of children.
Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of
explosion!
Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Wear chemical-resistant protective gloves and safety glasses when
handling leaking batteries.
Protect it from moisture, extreme temperatures, vibration or shock.
Getting started:
Open the battery compartment and insert the battery 1,5 V AAA, +/- polarity as indicated.
Remove the protection foil from the display.
Take out the battery to shut down the instrument.
Timer
Press the 0-9 buttons to adjust the desired time.
Press the START/STOP button to start the countdown.
Press the START/STOP button to stop and restart the countdown.
When the adjusted time is reached, an alarm will ring.
The timer counts the elapsed time until the alarm is stopped by pressing the START/STOP button.
On the display appears automatically the last adjusted time.
Press the CLEAR button to clear the reading.
Stopwatch
Press the START/STOP button to start the count up process.
Press the START/STOP button to stop and restart the count up process.
Press the CLEAR button to clear the reading.
Positioning and fixing
The device can be placed onto flat surfaces with the foldable stand.
With the magnet you can place the device on a metal surface or use the clip or wall mount the
device by the hanging hole at the back.
Troubleshooting
Problems
No display /Incorrect
display
Waste disposal
Never dispose of empty batteries and rechargeable batteries in household waste, take them
to your retail store or to appropriate collection sites. The symbols for the heavy metals
contained are: Cd=cadmium, Hg=mercury, Pb=lead.
Please do not dispose of this instrument in household waste. The user is obligated to take
end-of-life devices to a designated collection point for the disposal of electrical and electronic
equipment.
.
Solutions
Ensure that the battery polarity is correct
Change the battery (1,5 V AAA)