edenox TOST-2 Manual De Instrucciones página 8

1. General description:
The user manual is designed to assist in the safe and trouble-free use of the device. The product is
designed and manufactured in accordance with strict technical guidelines, using state-of-the-art
technologies and components. Additionally, it is produced in compliance with the most stringent quality
standards.
To increase the product life of the device and to ensure a trouble-free operation, use it in accordance with
this user manual and regularly perform the maintenance tasks. The technical data and specifications in this
user manual are up to date. The manufacturer reserves the right to make changes associated with quality
improvement.
2. Usage safety:
ATTENTION! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/ or serious injury or even death.
Whenever, device or product are used in the warnings and instructions, it shall mean Salamander Grill. Do
not use in very humid environments or in the direct vicinity of water tanks. Prevent the device from getting
wet. Risk of electric shock! Do not cover air inlets / outlets.
2.1 Electrical safety:
A. The plug has to fit the socket. Do not modify the plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
B. Avoid touching earthed elements such as pipes, heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to rain, in direct contact with a wet surface or operating
in a humid environment. Water ingression into the device increases the risk of damage to the device and
of electric shock.
C. Do not touch the device with wet or damp hands
D. Use the cable only in accordance with its designated use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
E. If working with the device outside, make sure to use an extension lead suitable for external use. Using
an extension lead suitable for external use reduces the risk of electric shock.
F. If using the device in a humid environment cannot be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of electric shock.
G. After each use, unplug the appliance from the power outlet.
2.2 Safety at the workplace:
A. Make sure the workplace is orderly and well lit. A messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is going on and use common sense when working with
the device.
B. Do not use the device in an explosion hazard zone, for example in the presence of flammable liquids,
gasses or dust. The device generates sparks which may ignite dust or fumes.
C. Upon discovering damage or irregular operation, immediately switch the device off and report it to a
supervisor without delay.
D. If there are any doubts as to the correct operation of the device, contact the manufacturer's support
service.
E. Only the manufacturer's service point may repair the device. Do not attempt any repairs independently!
F. If a fire starts, use solely powder or carbon dioxide (CO2 ) fire extinguishers suitable for use on live
devices to put it out
G. Children or unauthorised persons are forbidden from entering a work station. (A distraction may result
in a loss of control over the device).
2/6
NOTE:
Do not use the device unless you have
thoroughly read and understood this user
manual.