Insignia NS-SPST2B Guía De Montaje página 6

Installation instructions
STEP 1 - Installing the base pads
You'll need
1 Carefully place the base (03) top-down on a cushioned, clean surface to
protect it from scratches or damage.
2 Clean the 10 pad locations with denatured or isopropyl alcohol so that the
base pads (04) will bond securely.
3 Remove the paper backing from the 10 base pads and place them on the pad
locations on the base.
4 Repeat for the second base.
6
03 Base (2)
www.insigniaproducts.com
04 Base pad (20)
NS-SPST2B