Axis Communications T99A12 Guia De Instalacion página 23

AXIS T99A12 Positioning Unit 24 V AC/DC
Connect the cables
1. Loosen the four lid screws (T20) and remove the lid.
1
Input power connector
2
I/O connector
3
RJ45 connector
4
SFP slot for SFP module (SFP module not included)
2. Connect the network (optical fibre and/or RJ45), I/O and power cables. For more
information on different network connectivity options, see Install the network link on
page 18.
3. Return the lid to its position and tighten the four lid screws (torque 3.0 Nm).
4. Remove the protective cover.
5. Apply power to the product.
23
EN