Publicidad
ASSEMBLY INSTRUCTIONS
Phillips Head Screwdriver, Outdoor Wood Glue, Hex Wrench (provided)
STEP 1
A
x3
B
x6
FIG. 1
1. Apply a thin layer of glue in the elongated holes in the Right Leg Assembly (2) as shown
in FIGURE 1. Insert the Back (3) and Aprons (4) into the holes in the Right Leg Assembly
(2), securing the pieces together with three Hex Bolts (A). Attach Seat (5) to Aprons (4) with
Screws (B).
STEP 2
A
x3
FIG. 2
2. Apply a thin layer of glue in the elongated holes in the Left Leg Assembly (1) as shown in
FIGURE 2. Insert the Back (3) and Aprons (4) into the holes in the Left Leg Assembly (1),
securing the pieces together with three Hex Bolts (A).
503KFBAa Eden Bench
TOOLS REQUIRED:
A
C
A
C
503KFBAa — Page 3
Publicidad
