Publicidad
Idiomas disponibles
Idiomas disponibles
WF 0247
Turn off all switches and pull out power supply plug
when you go out for long time.
Never use the fan before finishing assembly to avoid any
hurts.
Disconnect plug when removing guards for cleaning.
ASSEMBLE AND USE
Diagrama de Partes
1. Front grill
2. Grille union ring
3. Propeller fixing nut
4. Propeller
Rear grill placement (6)
- Fix the rear grill (6) to the motor with the fixing nut (5).
- Attach the grill joint ring (2) to the rear grill by inserting the edge of the rear grill into the groove of the
ring.
- Tighten the screw, but not all the way, to avoid unnecessary movement while mounting the propeller.
Propeller Placement (4)
- Insert the propeller onto the motor shaft, fitting the motor shaft pin (7) into the slot on the back of the
propeller.
- Tighten the propeller fixing nut counterclockwise.
Front grill placement (1)
- Insert the edge of the front grill (1) into the other slot of the joint ring so that both grilles are well joined.
- Finally, tighten the screw of the union ring.
5. Rear grill fixing nut
6. Rear grill
7. Motor shaft
8. Tilt adjustment
9. Wall mount
10. Hook
11. Control panel
9
Publicidad
