GE 24746 Guia De Inicio Rapido página 2

Notice:
For the best reception, Please check the following conditions
1. Far away the sources of interference: Far away those big power consumption devices,
such as air conditioner, elevator, hair dryer and microwave oven. Etc
2. Near the windows.
3. Installed As high as possible: In case of digital terrestrial reception, if there are some
interception between Antenna and transmission tower, it will cause the signal loss
temporary. So if the antenna is installed as high as possible , those interceptions will be
reduced.
Normal installation (the antenna is installed nearby the Digital Set Top Box or the TV Set
with Digital Tuner inside)
Step 1.Take out the main unit
Step 2.Take out the standing unit, hook to the main unit.( as figure, it is suggested to use
horizontal installation )
Step 3.Take out the AC-DC Adaptor, connect the barrel end to the DC input, AC end to the
AC Outlet. Please note use only supplied AC adaptor.
Step 4. If there is a VHF signal in your area, you can pull out the VHF Rod for the best
reception
When you finished the installation, you can use your Set Top Box to check the signal
strength and quality. If the quality is not good enough to have smooth reception, you
can move the antenna to get the best reception position, when you find the best
position, please fixed it.
DESCRIPTION
VHF Rod
AC Outlet
AC Adaptor
(DC 9V)
Standing unit Fixing pole
INSTALLATION
Rear Panel
Coaxial Cable
STB or Digital TV