Publicidad
Idiomas disponibles
Idiomas disponibles
Connect with us!
INFLATE LOCATION
AUTOMATIC SHUT OFF INSTRUCTIONS
1. Plug the unit in with preferred power source.
2. Select pressure setting by pressing the button labeled PSI, BAR, or kPa (Please refer to
the manual of the product being inflated/deflated for appropriate pressure settings).
3. To get to desired pressure, press the + or – button until proper pressure is displayed.
4. Refer to the operation part of this manual for inflation.
5. Once the proper pressure is reached, the unit will automatically shut off.
LED LIGHT
1. Plug the unit in with preferred power source.
2. Turn the light on by pressing the light switch to the (D ) position.
3. Turn the light off by pressing the switch to the OFF position.
CLEANING AND STORAGE
• Wipe external surfaces of the inflator with a damp, clean cloth.
• Using a vacuum, clean debris from the air intake and external air vent.
• Let unit sit for 30 minutes after use then store in a dry area out of reach of children and away from metal objects to
prevent shorting.
MAINTENANCE
BEFORE EACH USE inspect the general condition of the inflator. Check for:
• Loose hardware.
• Misalignment or binding of moving parts.
• Cracked or broken parts.
• Any other condition that may affect its safe operation.
LIMITED WARRANTY:
H.D. Hudson Manufacturing Company warrants to the original purchaser only, that this product will continue to function as intended if used in accordance with operating instructions (under NORMAL CONSUMER
USE) for two years. If the product fails to function as intended—DO NOT RETURN IT TO THE STORE – call our CONSUMER SERVICE HOTLINE AT 1-800-9-SPRAYER (toll free) for fast service. We will, at our
option, repair or replace any non-functioning parts without charge (shipping and handling charges will apply). H.D. Hudson Manufacturing Company shall have the option of requiring the return of the non-
functioning product to the address listed below together with proof of purchase to establish a claim under this warranty. This warranty does not apply to damage resulting from accident, misuse, neglect,
alterations, operation not in accordance with instructions, commercial use, or normal wear.
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR CONSUMER USE, ARE LIMITED TO THE DURATION SPECIFIED ABOVE. H.D. HUDSON
MANUFACTURING COMPANY'S LIABILITY IS LIMITED SOLEY TO THE REPAIR OR REPLACEMENT OF THE NON-FUNCTIONING PRODUCT OR PART. H.D. HUDSON MANUFACTURING COMPANY EXCLUDES LIABILITY
UNDER THIS WARRANTY FOR ANY AND ALL INCIDENTAL AND CONSEQUENTIAL LOSS OR DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may have other rights which vary from state to state.
IF YOU HAVE ANY QUESTIONS OR CONCERNS: PLEASE CALL OUR CONSUMER HOTLINE AT 1-800-9-SPRAYER (1-800-977-7293).
WARNING!!! THIS PRODUCT IS DESIGNED TO APPLY CHEMICALS THAT MAY BE HARMFUL AND COULD CAUSE SERIOUS PERSONAL INJURY IF INHALED OR BROUGHT INTO CONTACT WITH THE USER. FAILURE
TO READ AND FOLLOW OWNER'S MANUAL INSTRUCTIONS BEFORE USE AND/OR MISUSE OF THIS PRODUCT COULD RESULT IN EXPLOSIVE FAILURE WITH MAJOR INJURIES.
1-800-9-SPRAYER
ladybug@hdhudson.com
Instructions for 18V Lithium Ion Inflator/Deflator
Customer service is here to help! If you have any questions or concerns, do not return to the store.
Call 1-800-9-SPRAYER or email ladybug@hdhudson.com
DEFLATE LOCATION
230021 Instructions
2303-23004
Instructions
RAFT/MATTRESS DEFLATION
1. Insert low volume hose into the air
intake on the side of the unit. (see "Deflate
Location" to the left).
2. Connect the other end of the hose to the
item being deflated.
3. To start deflating, turn the unit on low (|).
4. To stop deflating, return the power switch
back to the center (O).
©2019 Manufactured by H. D. Hudson
Manufacturing Company
Publicidad
