Gima 30892 Manual página 4

PRODUCT CARE
Do not expose your product to liquid or moisture or to humidity.
Do not touch the surface of lens with hand or hard objects.
Never clean the surface of lens with any hard and dirty materials.
Do not look into the sun or into a powerful light source with this loupe.
Purpose and features of the product
Purpose
SL series Binocular Loupes is designed for all possible medical needs. They are widely
accepted by Stomatology, ENT, Gynecology, Cardiology, Brain surgery and Plastic surgery
etc..
Features
- Multi-coated, high grade glass lenses produce crisp, clear images.
- The Loupes which employ eyepiece of very large view field diameter. The depth of focus is
deep and object can be seen stereoscopically with actual distance feeling.
- The angle of the loupes can be adjusted between 0º~40 º with ease and fatigue is mini-
mized even after prolonged use.
- 6mm up and down displacement. Pupil distance can be adjusted individually which could
be suited for all kind of faces.
- Adapts to any Head band and Headlight of Zumax
- Smart design, convenient for mobile diagnosis.
Operating Instruction
First step,please fasten the strap to the frame of glasses.
Put on the loupe and check that the pupil distance is symmetrically set.
Now look at a well it three-dimensional object. Adjust one eyepiece after the other until you
see a round image with no shadows and a focused object in each. Then screw in both set
screws.
The position of the optics is adjusted over a wide range by means of the hinge mount. The
ease of movement of the hinges can be adjusted by means of the hinge screws.
Maintenance of product
Maintenance of lens
- The instrument not in use should be covered and put into the packing box.
- Do not disassemble the optical lens by unskilled or unqualified technicians.
Cleaning
- The outer surface of the instrument may be cleaned with wet cloth,the remaining stains can
be cleaned off with the mixture of 50% alcohol and 50% distilled water. Do not wipe with
any corrosive detergent lest that the surface should be damaged.
- Cleaning the lenses: Mirror-cleaning paper or a drop of liquid solvent (50% alcohol and
50% aether) may be used to clean the lens, blow it carefully. If there is dust stained on the
lens, blow them with a blowball or brush them with a dust pen.
Caution: Be careful to prevent the solvent into the instrument
ENGLISH
4