Publicidad
Idiomas disponibles
Idiomas disponibles
User Manual
English
The following diagrams illustrate each configuration
Configuration A shows one source device and two displays connected to the switch. The
switch then allows the user to easily alternate output between display 1 or display 2.
Configuration B shows two source devices and one display connected to the switch. The
switch then allows the user to alternate between which source device is used to output to
the display
Operation
For output resolutions of 8K60Hz or 4K120Hz make sure that all source devices, cables,
and monitors support the resolution and refresh rate.
Especially for 8K60Hz make sure that your source devices and displays support HDMI
2.1 with DSC.
For optimal results we recommend that the input cable length is not longer than 2m for
8K60Hz or 4m for 4K60Hz.
Publicidad
