Descargar Imprimir esta página

Flama 1416FL Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

DESCRIPTION
1. Speed selector
2. Sticks ejection knob
3. TURBO button
4. Mixer body
5. Stirring whisks
6. Kneading hooks
7. Mixer holder
8. Rotating bowl
9. Arm unlock button
10. Mixer de-docking button
11. Spatula
OPERATION
Before first use
Remove the appliance and accessories from
the housing. Remove protective stickers,
films or plastics from the appliance, except
for the technical characteristics plate.
Before using the appliance for the first
time, wash and clean the parts that will be
in contact with food.
Clean the remaining parts with a damp
cloth. Never use abrasive products.
Use
The mixer allows you to stir, knead and beat
ingredients.
For the functions described above is
equipped with:
- Stirring whisks - for light pasta, castle
whites,
creams,
mayonnaise and purees.
These sticks are also especially suitable for
the preparation of sauces and puddings.
- Kneading hooks - for the preparation of
whipped
cream,
English
light doughs and pasta for cakes. The masses
for pies and pancakes, are also, easier and
faster prepared with these sticks.
WARNING - The maximum continuous
operating time must not exceed 10 minutes.
The rest time between two continuous
cycles should be at least 20 minutes.
Mounting the sticks in the mixer
Before inserting the rods, check that the
mixer is disconnected from the mains and
that the speed selector is in position 0.
In order for the rotating bowl to rotate
automatically during the use of the
appliance, it is important that the rods are
well inserted into the mixer.
Insert the sticks holding the mixer handle
with one hand and the end of the stick with
the other hand.
Insert the end into its hole, turn and press
carefully until it snaps into place. The end of
the stick with the sprocket must be fitted to
the respective hole.
To remove the sticks, press the eject button
on the sticks.
Mixer mount on support body
Before mounting the mixer, check that the
mixer is disconnected from the mains and
the speed selector is in position 0.
Press the arm unlock button and raise your
arm.
Place the bowl on the mixer holder, press
the arm release button down until it is
properly seated in the mixer holder.
Take the mixer with the rods mounted and
fit the arm, first on the front side of the
sticks and then on the back.
To undock the mixer from the stand, press
13

Publicidad

loading