ACERBIS SEREL Manual De Usuario página 15

EN
1.0 SIZE AND CORRECT FIT
warning
Size selection is very important for safety. Choose the correct size with the
assistance of your authorised Acerbis dealer: Never use a helmet that is too small or
too large for your head.
If you have already chosen your size and are not sure if it is the right one, please go
back to your Acerbis authorised dealer to have the helmet checked and if necessary
replaced.
warning
Never buy used or borrowed helmets. Wearing the wrong size
helmet can increase the risk of a serious injury or death.
A helmet which is too loose can move or come o your head following a sudden
stop or accident. Follow the instructions below to choose the right size of your
helmet:
1.1 INSTRUCTIONS TO DETERMINE THE EXACT SIZE
A safe helmet is one that wraps entirely around your head, put on the helmet by
taking hold of the strap to slip it completely over your head making sure to keep
contact with the inner and upper padding of the helmet: Once the helmet is
worn, its inner padding and cheek pads must fit snugly, there must be no space
between the padding and your head.
warning
While wearing your helmet, always make sure that your field of vision is clear and
that you are able to see well enough to operate your vehicle.
Make sure that you can breathe freely and that nothing is blocking the flow of air
inside the helmet.
warning
Check the fit of the helmet then shake your head left/right and front/back. Try to
move the helmet with your hands, if it is too wide and tends to slip o , try a smaller
size. If the pressure on your head is bothersome or painful, try a larger size.
14