EN
For your safety
Read all notes and disassembly
steps carefully.
Explanation of the warning levels
Observe and follow the warnings.
Non-observance of the warnings
may lead to injuries or material
damage!
WARNING! Indicates dangers
which can result in serious and/or
fatal injuries.
CAUTION! Indicates dangers which
can result in injuries or health haz-
ards.
NOTICE. Indicates dangers which
can result in material damage or
malfunctions.
TIP. Indicates information contain-
ing advice or a useful note.
Explanation of important symbols
and pictograms
Identifies expert personnel trained
and authorised to perform disas-
sembly.
Safety notes
WARNING! Risk of electric shock!
Never work on the luminaire with
voltage applied.
CAUTION! Risk of injury! Install the
luminaire components using pro-
tective gloves.
NOTICE. Avoidance of damage to
electrical components. Take mea-
sures for ESD protection.
TIP. The instructions show the
steps to be taken as an example for
the type of luminaire shown. The
number of components may vary.
Disposal of waste electrical and
electronic equipment
6 | 30
COMBIAL 40 LED
Disassemble LED module and
control gear unit
Pos.
1.
10 Loosen the screw. (8x)
2.
20 Remove the cover.
3.
XX Disconnect the plug.
4.
XX Disconnect the earth connec-
tion.
5.
30 Loosen the screw. (4x)
6.
40 Remove the reflector.
7.
50 Loosen the screw. (1x)
8.
60 Remove the component.
9.
70 Loosen the screw. (6x)
10.
XX Disconnect the cable from the
LED module using an auxiliary
tool.
11.
80 Remove the LED module.
80 The LED module is completely
removed.
12.
90 Loosen the screw. (2x)
13.
XX Disconnect the cable from the
control gear unit using an auxil-
iary tool.
14.
100 Remove the control gear unit.
100 The control gear unit is com-
pletely removed.
DMA-10147 | 220217 | © trilux.com