Publicidad
Idiomas disponibles
Idiomas disponibles
EN
AUTO USER RECOGNITION
When scale is power off or standby, please step on the scale to get a weighing value.
LCD will lock the reading in one second. If the scale can search similar weighing value
(value difference below ±2kg), LCD will flash weighing value once and show user code.
The scale will automatically recognize current measuring user after flashing user mode
once. Then scale will enter into measuring other data, like body fat, hydration, etc.
Power off
Tap on the scale platform
Digits locked
Automatically recognize user
Measuring...
Measured results (Repeat for 3 times)
Remark:
1. After searching users with similar weighing value and flashing the weighing value once, the scale can not
enter into body fat measuring if users do not touch metal electrodes effectively. The scale will only show
users' gender and current weighing value, till automatically shut down.
2. If the scale find two or more similar weighing value, it will choose the user with closest weighing value. If
the scale find two same weighing values, it will choose the user code in front.
If no users with similar weighing value, or
no user created for the first time of use,
the scale will be power off automatically
after showing weighing value.
Shut down
automatically
21
TO RECALL TEST RECORD
Press SET(ON/SET)
Power off
to switch on
Show parameters
of the last user or
default parameters
Display the last test record of the user. Press
Repeat 3 times and
switch off automatically
Shut down
automatically
22
Press
to select user code
Wait for 6 seconds or
Tap on the scale platform
Press
to enter
Recall mode
for quick checking.
EN
Publicidad
