Publicidad
Idiomas disponibles
Idiomas disponibles
EN
If the self-leveling cannot be performed,
because the laser supporting base has
an inclination higher than 4° with the
horizontal, the self-leveling indicating
light turns red.
Outside the self-leveling range of
±4° it is not possible to operate with
self-leveling.
1. Place the laser on a horizontal and firm
surface or fixe it in a support (10, 11 and 12);
2. Place the "ON/OFF" switch (3) in
position "ON";
3. Press the projection mode selecting
button (4) according to the desired
laser ray projection mode;
4. Wait until the self-leveling indicating
light (5) turns green and the projected
laser lines become stable. In that
moment, the laser is ready to be
operated;
Without self-leveling:
With the self-leveling turned off, the
laser lines projections are locked and
stop being self-levelled. It is possible
to hold the device with both hands
and place it over an inclined surface or
support.
5. Place the "ON/OFF" switch (3) in
position "OFF";
6. Press the projection mode selecting
button (4) according to the desired
laser ray projection mode;
7. While using the laser without self-
leveling, the indicator light (5) keeps
red;
5. MAINTENANCE
AND CLEANING
INSTRUCTIONS
This device does not need additional
lubrication or maintenance. However,
it
needs
a
proper
and a regular cleaning to operate
continuously with no issues.
Before inspection, maintenance and
cleaning works, turn the equipment off
and remove the batteries.
5.1 - CLEANING
AND STORAGE
Cleaning
After
each
use
clean
components. Clean the machine with a
clean and damp cloth and blow it with
low pressure compressed air. A careful
handling protects the machine and
extends its lifespan.
Storage
Every time the laser is not being used,
store it inside dry, clean and corrosive
steam free places away from children's
reach. Remove the batteries when
storing the device.
6. ENVIRONMENT
The packaging is made of
recyclable materials, which
can be disposed on local recycling
maintenance
points.
Never place power tools in
the domestic waste!
According to the European Directive
2012/19/EC
electronic equipment waste and its
transposition into national law, power
tools must be collected separately
and delivered to the collection sites
provided for this purpose.
all
the
In accordance with European Directive
2006/66/EC, defective or used
batteries must be collected separately
and delivered to the designated
collection points.
You can obtain information regarding
the disposal of the machine through
the person in charge for the recycling
in your city.
Tel.: 00351 256 331 080
E-mail: sat@centrallobao.pt
Site: www.centrallobao.pt
SAFETY
on
electrical
7. CUSTOMER
SERVICE
and
21
Publicidad
