AMS KIT-360-VIEW Manual Del Usuario página 14

EQUIPMENT TESTING
To conduct testing, you need to:
- Set up the devices (4 cameras and screen)
- Connect to the screen (new screen or original screen via an adaptor cable)
- Connect the devices without making permanent connections.
- Connect the control lines (reverse, left and right indicator, etc.).
- Power up and switch on the system.
- Select preferred language with the MENU button.
- Test the operation of the components together (camera viewing).
- Perform 360 calibration
- If you are satisfied with how the system operates, install the devices and connections permanently.
PERMANENT CONNECTIONS
When you set up electrical connections:
> Use crimping pliers to join the cables.
> For permanent connections, you can gather together the cable ends by soldering and then insulating them.
> For connections to the ground line, crimp with a round terminal and connect to a vehicle ground screw
with a serrated washer, or self-tapping screw to the vehicle bodywork.
> Ensure that the grounding transfer is done correctly.
> Avoid attaching cables to movable items (e.g.: steering columns, racks, pulleys, etc.)
Please check that they are not:
> Bent or twisted. In the event of excess cabling, do not roll up the cable onto a reel, make a serpentine belt.
> Ensure no friction against metal edges.
> Ensure no cables are placed along paths with sharp edges and no protection (use a cable gland or
stuffing box).
- Insulate all the joins and connections for protection against water and dust.
- Protect the cables from any mechanical pressure by securing them.
Ensure that all of the connections have been done correctly.
> Any connection of the camera's automatic control wire to ground is prohibited, the device could be
damaged. It is imperative to insulate in particular the exposed ends of control lines when these are not in
use and are therefore not connected
14
AMS Diffusion - Rue des Galeries - ZA du Chevalement - 59286 Roost Warendin - FRANCE - Tél. +33 (0)3.27.94.44.44 - Fax. +33 (0)3 27 94 44 45
Email : contact@ams-diffusion.fr - www.ams-diffusion.com RCS DOUAI A 451 360 382 - CODE APE 4531Z - SIRET 451 360 382 00035 - TVA FR 55 451 360 382
5. TECHNICAL ADVICE