Using Your Appliance; After Use; Emptying The Dust Cup; Repair Service - stayer VAC L 18 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our
accessories program.

4. Using your appliance

-Do not use the appliance to pick up liquids or any material
that could catch fire.
-Do not immerse the appliance in water.
- To prevent wet spills from entering the motor, do not
a. Turn the appliance upside down or sideways
b. Point the nozzle upwards
c.Shake the appliance excessively
-Empty wet spills immediately
Before vacuuming, ensure that the filter assembly is
assembled securely.
Only use an undamaged filter (no cracks, small holes,
etc.). Replace a damaged filter immediately.
Switching On and Off
To save energy, only switch the vacuum cleaner on when
using it.
– To switch on the vaccum cleaner, move the On/Off
switch 1 forwards (direction ON).
– To switch off the vaccum cleaner, move the On/Off
switch 1 backwards (direction OFF).
5. Maintenance and service instructions
Remove the battery before performing maintenance
or cleaning the vacuum cleaner, device settings,
changing accessories or storing the vacuum. This
measure prevent will reduce the risk of accidentally
connect The vacuum cleaner.
Always keep clean the vacuum cleaner and grids
ventilation to work effectively and safely.
- Clean the housing of the vacuum cleaner from time to
time with a damp cloth.
- Wipe dirty charging contacts with a cloth dry.
Warning! Regularly clean the filter
5.1 Cleaning the dust cup and filters
The filter 8 are re-usable and should be cleaner regularly
- Empty the dust cup 6 as described above.
- Brush any loose dust off the filters.
- Wash the filters in warm, soapy water. The cup can also
be washed if necessary. Do not immerse the appliance
in water.
ENGLISH
12
- Make sure the dust cup and filters are dry.
- Refit the filter -Refit the dust bowl onto the appliance.
Make sure the bowl clicks into place.
Warning! Never use the appliance without the filter.
Optimum dust collection will only be achieved with clean
filter and empty dust cup.
Replacing the filters
The filters should be replaced every 6 to 9 months and
whenever worn or damaged.

6. After use

- Always empty and clean the bowl after picking up liquid.
Do not store the appliance with liquid in the bowl
- When not in use, the appliance should be stored in a
dry place. Children should have access to stored
appliances.

7. Emptying the dust cup

- Press the release button 3 and remove the dust cup.
- Remove the filter 8.
- Empty the dust cup 6.
- Refit the filter 8.
- Refit the dust cup onto the appliance. Make sure the
dust cup clicks 3 into place.

8. Repair service

Our after-sales service responds to your questions
conceming maintenance and repair ofyour product as well
as spare parts.
Exploded views and information on spare parts can also
be found under: info@grupostayer.com
Our customer consultants answer your questions
conceming best buy, application and adjustment of
productsand accessories.
9. Warranty
Warranty card
lncluded in the documentation that accompanies this
equipment, you should find the warranty card. You should
fill out the card completely and retum to vendar with a copy
of purchasing receipt or invoice and you should receive a
receipt.
Note: lf you cannot find the warranty card within
the documentation,youmust ask for it through your
supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired otherthan themanufacturer.
12

Publicidad

Tabla de contenido
loading

Tabla de contenido