• During juicing, make sure there is not too much
EN
juice and residue in the middle ring and pulp
container. If too full, turn off power supply, clean
up and then use again.
• During use, do not open the juicer cover. While
the power supply is on, do not put your hand or
any utensil in the mixing container or feed port,
as otherwise a harmful accident may occur or the
machine may be damaged.
• In order to prolong the service life of this machine,
an excess temperature protection device is
mounted in the motor. If the motor is on for a
lengthy period or is overloaded and the warning
temperature is exceeded, the power supply
will automatically cut off. After the motor stops,
disconnect the power supply plug, wait for the
motor to cool (about 30 min) and use again.
• When using this machine for mixing, mincing or
grinding purposes, working without load or with
an excessive load is strictly prohibited.
• After operation, do not empty out the food
until you have disconnected the power supply
at the plug.
• The cutter is very sharp, so in order to avoid danger
when cleaning it, please hold the cutter under the
water tap for washing, and do not wash it by hand.
INSTRUCTION MANUAL · SQUEEZY
6