LOCATION OF CONTROLS
1. FM TELESCOPIC ANTENNA
2. CD DOOR
3. CD DOOR OPEN AREA
4. FUNCTION SWITCH
5. VOLUME CONTROL
6. POWER INDICATOR
7. FM ST. INDICATOR
8. HANDLE
9. USB PORT
10. TUNING CONTROL
11. BATTERY COMPARTMENT
POWER SUPPLY
BATTERY OPERATION
1. Remove the battery compartment cover gently.
2. Install 6 x 'C' size batteries (UM-2 or equivalent) while observing the correct polarities.
3. Replace the battery compartment cover.
NOTE:
The AC cord must be detached from the AC socket of the player.
Leaking batteries may damage the battery cabinet and the player as a whole, so they should be
removed from the cabinet when becoming flat or when the player is not to be played on batteries
for some time.
AC OPERATION
Insert the AC cord to the AC socket of the player, and plug the other end to an applicable wall
outlet.
NOTE: If the AC plug of this unit does not fit in with your AC outlet, a plug adaptor should be used.
Consult your local dealer on the type of plug adaptor.
TO PLAY THE RADIO
1. Set the FUNCTION switch to the FM or AM position, the POWER Indicator will light up.
2. Tune to the desired station by rotating the TUNING control (rotate that control back and forth until
you get the strongest and clearest reception).
3. When FM (stereo) station is received, the FM indicator will be lit up.
4. The built-in AM antenna and external FM TELESCOPIC ANTENNA are directional.
When you are receiving an FM broadcast, fully extend the TELESCOPIC ANTENNA and rotate it
for the best reception.
For AM broadcast, rotate the whole set until the best reception is heard.
5. Adjust the volume level to a comfortable listening level.
6. To turn off the radio, set the FUNCTION switch to the OFF position.
12. AUX IN JACK
13. STOP/USB BUTTON
14. NEXT/FAST FORWARD BUTTON
15. MODE/PROG BUTTON
16. PLAY/PAUSE BUTTON
17. SPEAKERS
18. PREV/FAST BACKWARD BUTTON
19. LCD DISPLAY
20. +10 BUTTON
21. AC SOCKET
GB-2