EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave
the plastic bags out their reach. The small parts pose a choking
hazard.
Material
Mod.A:
Cover (Copparo): 100% polyester.
Mod. B:
Cover (Melina): 85% polyester, 15% acrylic.
Mod.C:
Cover (Bormio): 100% polyester.
Mod. D:
Cover (Super velvet): 100% polyester.
Mod. E:
Cover (Alba): 100% polyester.
Mod. F:
Cover (Bellagio): 51% cotton, 28% viscose, 7% linen, 7% polyester
6% acrylic, 1% polyamide.
Mod. G:
Cover(Lucca): 59% polyester, 17% cotton, 16% viscose, 8% linen.
Mod. H:
Cover (Venezia): 62% polyester, 17% cotton, 14% viscose, 7% linen.
Structure seat: plywood.
Structure backrest, armrest: plywood, chipboard and high density
fiberboard (HDF).
Seat padding: polyurethane HR foam 30kg/m³, polyurethane foam
25kg/m³, polyurethane foam 23kg/m
Backrest,
armrest
padding:
polyurethane foam 25kg/m³, polyurethane foam 23kg/m
wadding 300g/m
.
2
Suspension: nozag springs.
Feet: oiled solid oak.
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
Maintenance
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry
dabbing to absorb the liquid. Do not rub, it may damage the fabric.
Variations in color between the surfaces cleaned and uncleaned
might appear. Avoid direct and prolonged exposure of the product
to sunlight. The colors may fade.
Do not place the product near a heat source (radiator, fireplace...)
nor a moisture source. The heat and humidity can damage the
product.
Do not use abrasives.
If in doubt, call a professional to carry out cleaning.
Cossano - 01/2023
and wadding 300g/m
.
3
2
polyurethane
foam
22kg/m³,
and
3
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.com or
write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2