Publicidad
Idiomas disponibles
Idiomas disponibles
7
III
7
10. Open the quick-release clamp (7) upwards (arrow I) and fold up
the rack frame (6) (arrow II).
11. Close the quick-release clamp (7) again completely (arrow III)
to fix the rack frame (6) in place.
8
17
9
Attention
Always hold and fold out the wheel rails (8) by holding the
crosspieces (17) and not the tail light unit (9). Otherwise the tail
light unit (9) may be damaged.
12. Hold the wheel rails (8) at the crosspieces (17), fold them out
and lock them in place.
13. Check that the lights work correctly.
I
II
8
6
13
14. Push the holder (18) down (arrow I).
15. Slide the number plate (19) into the number plate holder (13),
push it up and press it all the way in (arrow II).
16. Release the holder (18) and check the number plate for tight fit.
Note
To insert larger number plates, press back the stopper (20) and
push the number plate all the way into the number plate
holder (13).
Note
The number plate on the bicycle rack must match the vehicle's
M+P-25A-0293
registration number and must be clearly legible.
Removing the bicycle rack
17
M+P-25A-0294
Attention
Always hold and fold in the wheel rails (8) by holding the
crosspieces (17) and not the tail light unit (9). Otherwise the tail
light unit (9) may be damaged.
1. Hold the left side of the wheel rail at the crosspiece (17) and
fold it in (arrow I).
2. Hold the right side of the wheel rail at the crosspiece (17) and
fold it in (arrow II).
- 15 -
20
II
19
8
17
I
9
I
18
II
M+P-25A-0295
17
II
8
M+P-25A-0325
Publicidad
