WIRELESS
GWC7000
EN
2 IN 1 COMBO
ENGLISH
6. Plug the Nano USB receiver into PCs/ Laptops USB
Port, and it will automatically install. Please, note
there is no software required.
7. Press the left and right buttons on the mouse and
will the keyboard and mouse will start to work
automatically
FAQ
1. If the devices doesn't work, make sure it's plugged
in properly into the USB port of your computer.
If it still doesn't work try other USB ports.
(*)note: remember to check the battery charge
frequently
2. If the mouse moves slowly, jumps, or lags, try it on
another surface. Dirty, shiny, or uneven surfaces
can affect mouse performance. The use of Pads is
strongly recommended for the correct operation of
the device.
3. It is important not to lose or damage the USB
receiver since without it, both devices will not work
®