Publicidad
Idiomas disponibles
Idiomas disponibles
TEMPLATE GUIDES (NOT PROVIDED)
The round subbase will accept universal
template guides. Use only a maximum 1-3/16"
(30.5 mm) template guide with this tool.
To use a template guide:
1. Center the round subbase following the
instruction in above section "TO INSTALL
SUBBASE".
2. Insert the template guide into the center hole
of the round subbase and secure according to
the template guide instructions.
NOTICE: The D-shaped subbase does not
accommodate template guides and is designed
to accommodate bits up to 1-1/2" (38 mm) in
diameter.
-16-
Publicidad
