Liemke CHARGER-K Manual De Instrucciones página 23

Inserting the battery(batteries)
1. Align the guide bar of
the battery housing with
the guide groove (01).
The grip on the battery cov-
er must point towards the
small orientation point (02)
on the charger housing.
2. Push the battery in as far as it will go.
3. Turn the bayonet lock of the battery approx. 45° clock-
wise so that the cover locks into place.
Charging the battery(batteries)
> Connect the USB-C plug of the power supply unit to the
USB-C socket (06) of the charger.
> Connect the power supply unit to a power socket.
The charging process begins after connection to the power
source.
The status LEDs indicate the charging status.
LIEMKE CHARGER-K · Instruction manual 10 / 2022
02
1
E
N
22
–
23