Therabody SmartGoggles Manual De Instrucciones página 7

Charging
• SmartGoggles are USB-C enabled.
•
SmartGoggles include a Therabody USB-C to USB-A cable.
• The USB port is located on the side of the device, behind the Power Button.
• Ensure that the battery status LED light is OFF before charging.
•
Insert the USB-C cable into the port to charge SmartGoggles.
•
The battery level is displayed in the LED indicator on the battery, next to the USB-C
connector:
•
Orange: low charge, blue: mid charge, green: fully charged.
•
When charging, the LED will flash to indicate it is properly connected and will
turn solid green when complete.
Note: If using a charger from a third party, ensure that it is from a certified
manufacturer and has not suffered any structural damage. Do not try to use the device
while charging.
Cleaning Instructions:
1.
To clean, wipe the inner fabric of your SmartGoggles with a non-abrasive, lint-free cloth.
2.
Lightly dampen a non-abrasive, lint-free cloth with water or an alcohol-based solution to clean if necessary.
3.
Dry SmartGoggles with a non-abrasive, lint-free cloth.
4.
SmartGoggles are NOT waterproof or machine washable. Do not allow excess liquids or water to enter the
product.
EN
7