Xrocker 2.0 WIRED Manual De Instrucciones página 2

CONNECT TO TV (WIRED)
1. Connect the B1 cable to X Rocker control panel INPUT socket.
2. Connect other end of the B1 3.5mm end into the headphone socket of your television.*
3. Once connected to your TV, increase volume to 50% of the maximum for the best sound level.**
* If your TV does not feature a headphone socket then you may need to purchase an additional TOSlink adapter to get connected directly to a console for audio.
**Depending on your TV, you may need to increase the headphone volume separately in the TV sound settings.
TROUBLESHOOTING TIPS
NO POWER GOING TO THE CONTROL PANEL
• Make sure the power cable is connected correctly.
• Make sure that the power source is working correctly.
• With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any light flickers (or not) please contact support (UK: xrockeruk.com/pages/support).
NO SOUND
• Connect a mobile phone to the X Rocker using the phone connection guidelines in the manual to test the chair for sound.
• Confirm that the device/system is correctly configured as per previous connection guide.
• Make sure that you indeed have a headphone socket on your TV. This will typically be marked with a headphone symbol or "H/P OUT".
STEREO SPEAKERS DO NOT PRODUCE SOUND/SOUND IS FAINT
• Please make sure the volume of the source device is at a higher level to strengthen the audio signal.
THE CABLES CONNECTED TO MY X ROCKER HAVE BEEN BROKEN ACCIDENTALLY
• Please contact X Rocker support (details below) regarding this issue.
DON'T HAVE A HEADPHONE SOCKET ON YOUR TV?
• You may need to purchase a TOSlink adapter. If you are unsure as to which to purchase, please contact X Rocker support (details below) regarding this issue.
USER MANUAL ICONS
NEED ADDITIONAL ASSISTANCE? CONTACT X ROCKER SUPPORT:
5V 1A
OFF ON
WWW.XROCKERGAMING.COM
XROCKERGAMING.COM/PAGES/SUPPORT
Ocelot
Gaming Desk
USER MANUAL ICONS
TV/Mobile/Tablet
OFF ON
B1
WWW.XROCKERUK.COM
XROCKERUK.COM/PAGES/SUPPORT
5V 1A