Descargar Imprimir esta página

Orbegozo DA 2000 Manual De Instrucciones página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

DA 2000
INSTALLATION
- Check if the adaptors are needed for a better fixing of the product to the watter bottle. If needed, insert
the adaptor in the bottom water dispenser bottom space.
- Conect the silicone tube to the bottom inlet of the device and put the tube inside the water bottle by
rotating it so it gets placed in spiral and avoid it to get folded.
- Place the device on the bottle neck and fix it.
- Put the SS pipe by its longer side on the water outlet hole.
USE
- Press the ON button once to start working. The device will pump water during a minute before stopping
automatically. The LED indicator will glow on blue.
- Press the ON button again to stop the device manually.
- Hold the ON button pressed for 3 seconds to start puping water for 10 minutes before the device stops
automatically. The LED indicator will glow on blue.
- Press the ON button again to stop the device manually.
CHARGING THE BATTERY
- Conect the device to power supply by using the mini-USB cord (incluided) and an adaptor (5V-DC 1A not
incluided). The LED indicator will glow on red.
- The LED indicator will turn off automatically when the device gets full charged.
CLEANING AND DESINFECTION OF THE DEVICE
It's recommended to clean and sanitize the dispenser usually to assure the water quality. Read in detail the
following steps to clean and desinfect your water dispenser:
1. Fill a 5L bottle with ¾ of mineral water and add ½ spoon of liquid bleach. Do not use a more
concentrated proportion!
2. Empty the desinfectant solution through the water dispenser.
3. Empty a second only water 5L bottle through the water dispenser to remove the desinfectant from inside
the device.
4. If you find a slight bleach taste in the water, add a soda Tablet to the bottle and make it pass through the
device after 5 minutes.
Note: The water dispenser is can't be used to pump different to water liquids.
TECHNICAL DETAILS:
Model: ................................................................................................................ DA 2000
Power: ............................................................................................................... 5 V-DC / 4W
8

Publicidad

loading