SkillKorp M11 Manual De Instrucciones página 6

INSTALLING THE MOUSE
You have a wired mouse. Connect it using the cable provided.
1. Remove the mouse from the packaging and unwind the cable.
2. Plug the USB connector into a USB port on your computer.
3. During the first use, the operating system automatically detects the mouse and
invites you to install a USB pilot.
4. An information bubble stating "New device detected" appears on the bottom
right of your screen. Your mouse is ready for use.
INSTALLING THE APPLICATION
Before installing the application for configuring the mouse, please ensure that no
other mouse is installed on your computer.
1. Download the application available on the website:
https://www.boulanger.com/info/assistance
section) and follow the instructions of the installation wizard.
2. After installation, a shortcut icon appears on your desktop.
3. Click on the icon to configure your mouse.
10_INSTALLING THE MOUSE
(in the "Pilotes et logiciels"
TROUBLESHOOTING
The mouse no longer responds correctly, it jerks, jumps or freezes:
- Always use a suitable non-shiny surface, or ideally a gaming mouse pad.
- Check that the optical sensor is not dusty. If this is the case, rub it gently with a
dry, lint-free cloth.
- Reduce the DPI level to enable proper communication between the PC and the
mouse.
- You can use the application to revert to factory settings. When the software
is launched, export the profiles you created, then click on the "Reboot" button.
Confirm to validate reboot.
TROUBLESHOOTING_11