Wiesenfield WIE-FMO-135S Manual De Instrucciones página 58

2. Remove all three clevis hitch pins.
3. Align ball swivels in the tractor's lower 3-Point arms with pin holes in the lower
hitch clevises of the mower. Insert hitch pins and secure with hair pin cotters.
4. Align the top center link with the center hitch clevis of the mower. Insert hitch
pin and secure with hair pin cotter.
5. With tractor's 3-Point controls, lift mower up 1 to 2 inches and then raise jack
stands fully up. Secure stands with jack pins and hair pin cotters.
6. Level mower by adjusting lower 3-Point arms and upper center link. Refer to
"Leveling the mower".
Tractor Hook-Up (Figure 1-2)
Driveline Installation
DANGER!
Do not engage tractor PTO while hooking-up and unhooking driveline or stand
near a rotating driveline. A person's body and/or clothing can become entangled.