Sunmer 103887 Manual De Instrucciones página 5

Operating the Product
Inflation
1. Fit the pump (A) into the socket on the airbed (1.1).
2. Screw the pump clockwise until it locks in (1.2).
3. Fix the 'figure 8'- end of the power cord (C) to the socket on the
pump (1.3).
4. Attach the plug-end of the power cord to the wall socket (1.4).
5. Once the mattress has filled with air, remove the power cord.
6. Place the locking device (B) over the pump and screw clockwise
until locked in (1.5).