Rio face LITE Manual De Instrucciones página 6

Face mask
1
Controller
2
On/Off
3
LED indicator
4
lights
Before carrying out your first treatment you must carry out a
sensitivity test (patch test).
1. Place faceLITE over your inner arm.
2. If at any time your skin feels HOT or uncomfortable STOP
using the device immediately.
3. After the treatment wait at least 6 hours. If the skin on your inner
arm appears red and/or itchy then faceLITE is unsuitable for
you.
While the light used in your faceLITE is completely safe, you may
find the lights quite bright. If you do find the LED lights a little bright,
the optional eye shields can be used to for enhanced levels of
comfort. The eye shields are easily fitted directly into the eye holes.
To charge faceLITE insert the power adaptor into the USB-C
socket of the controller. Plug the AC/DC adapter into a mains
power supply and turn it on. The 3 LEDs on the control unit will start
to flash to indicate charging. When fully charged all three LEDs will
be illuminated.
Note: Always recharge when the last LED starts to flash.
faceLITE will not operate whilst charging.
KNOW YOUR UNIT
USB-C socket
5
USB socket
6
Adaptor and four
7
connectors, UK,
EU, China and
USA
PATCH TEST
EYE SHIELDS
CHARGING
6
Head strap
8
Carry bag
9
Eye shields
0