Descargar Imprimir esta página

gala gar GASWELD DARK Manual De Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

GasWeld
3.- OPERATION
1. Before first use, remove the protective film from both the
outer and inner filter lens (ADF).
2.- Adjust the head to your measurement, both in extension and
diameter, until a firm and comfortable fit is obtained.
a) Adjust the band diameter with the adjustment knob on the
back of the head. Turn the knob clockwise to tighten; or turn
counterclockwise to loosen the band.
b) Adjust the upper band to one of the preset
positions for correct depth.
c) To adjust the viewing angle, reposition the ratchet
mechanism located on the side of the suspension to the
desired elevation position. Once the desired angle is
achieved, ensure that the locking pins are secure. The hull
should be able to be folded down, but should not deflect
downwards when in place for welding.
d) To adjust the distance between the user's face and the ADF,
press the set of buttons located on the sides until the
headband can move freely back and forth. This must be
done on one side at a time, and both sides must be in the
same position for correct operation of the auto-darkening
filter.
e) Shade control is done from the outside of the mask with the
knob, where the first locking position is DIN 3, position
GRINDER, and then, once the knob is unlocked, the shades can
be adjusted from 9 to 13, as required.
DARK
SUPERIOR
4.- TECHNICAL SPECIFICATIONS
Gasweld DARK
CARTRIDGE SIZE
AREA OF VISION
RESPONSE TIME
PROCESSOR
NO. SENSORS
TYPE OF VISION
BATTERY TYPE
MINIMUM AMPERAGE
TYPES OF WELDING
CURRENT TYPES
IR / UV PROTECTION
RANGE OF SHADOWS
REGULATION KNOB
OPERATING TEMPERATURE
DELAY
SENSITIVITY
ON / OFF
OPTICAL CLASS
CERTIFICATIONS
HULL MATERIAL
EN
Ref.: 5998F
Ref.: 5998FC
Specifications
110x90 mm.
92x43 mm.
1/25000s
CX10
2 DIGITAL
FULL COLOUR
CR2032 (REPLACEABLE) X1
4A
MMA / TIG / MIG / PLASMA
AC & DC
Up to DIN 16 - 98%.
3 (GRIND) / 9-13 (WELD)
EXTERNAL
-5ºC to +55ºC
AUTOMATIC
AUTOMATIC
AUTOMATIC
1/1/1/2
EN175 - EN379 / CE
ABS REINFORCED

Publicidad

loading

Este manual también es adecuado para:

5998f5998fc