OPTIKA MICROSCOPES CL-30 Manual De Instrucciones página 2

Description
CL-30 / CL-31 / CL-41 is a twin flexible-arm illuminator, with LED sources. It offers low power con-
sumption, low operating temperatures, and a colour temperature similar to sunlight.
specifications
Light sources:
Chromaticity coordinates (x,y):
Luminous flux:
Emission angle:
Power supply:
instructions
Connect the power supply (included) to the jack located on the back of the instrument. CL-30 can be
switched on and off from the switch located above the supply jack.
Bend the flexible arms, aiming the light in the desired direction.
in the cL-31/cL-41 model the intensity of the light can be adjusted by using the dedicated
knob.
Clean with a soft dry cloth. Do not use solvents.
Note: during use, the arm tips may become warm. This is normal, and does not cause malfunction.
Warning: as for optical safety, the LeD's must be treated
as lamps to all respects.
Do not stare into the LeD's from a close distance.
Page 
LED (x)
0.30, 0.30 (typical)
CL-30/CL-31: 150 lm (typical)
CL-41: 400 lm (typical)
5°
1 Vdc, 1500 mA