Publicidad
Idiomas disponibles
Idiomas disponibles
La Rocca Exprés, S.A.
MACHINE ELEMENTS .
1.- Hot water knob
2.- Group 1
3.- Hot water outlet
4.- Working tray
5.- Adjustable feet
6.- Steam outlet
7.- ON/OFF Indicator
Figure 1
8.- Heating element indicator
9.- Main switch
10.- Steam knob
11.- Keyboard group 2
12.- Boiler pressure gauge
13.- Keyboard group 1
UNPACKING THE MACHINE
When unpacking your machine, you will find the following accessories over
the working and cup-warmer trays:
-1 drain flex hose
-1 Stainless steel-flex hose
-1 Blind filter
-Installation card
-This instruction manual with the CE declaration of conformity, and so many
filterholders as the machine groups'.
Be sure that these accessories are included.
Remove carefully the plastic cover of the stainless steel parts, and check if
the machine has suffered damages during its carriage.
MACHINE PLACEMENT
The machine must be placed at the optimum position to be operated
without taking a forced posture.
When you have to decide the right place for the machine, you must keep in
mind the needing of electrical supply, a net intake and a drain outtake.
Leave a certain distance between the machine and the walls both sides
and the back of the machine for air circulation.
Do not install the machine:
In places exposed to the sun light, the rain or where it may be hitted.
Near objects that can result damaged because of the steam and heat
emitted by the machine.
PRELIMINARY INSTRUCTIONS
Before you start to install the machine, you must be sure of the efficiency of
the electrical and the water net (if needed).
Connection to the water net (for models without reservoir)
To connect the machine to the water net, you must use the included hose. The
water intake of the machine is visible when removed the working tray.
Once made the connection, you must open the main faucet. If loss of water is
observed, tighten again the nut of the hose.
The next connection to be done is the water-drainage, by means of the
flexible hosepipe, that will have to be inserted in the collector under the work tray,
making sure that the hose is anchored in the collector in order to avoid water
escapes.
Modelo JAVA Pro – Manual del Usuario
Publicidad
