AMS CT412 BT Instrucciones De Uso página 13

DAB+ function
Select Manual dimming to adjust Brightness
of display and Buttons". Select DIM MAN and
change between day mode and night mode by
selecting "DIMDAY" or "DIMNIGHT""
> To adjust Night Brightness of the display and
buttons select "DIMNIGHT"
> To adjust Day Brightness of the display and
buttons select "DIMDAY"
DIM KEY
Select "DIM KEY" and adjust the brightness
from the buttons
DIM DISP
Select "DIM KEY" and adjust the brightness
from the display
MW (ON/OFF)
To enable/disable MW Reception
LW (ON/OFF)
To enable/disable LW Reception
Switching automatic between DAB
and FM (DABFMLNK)
Switching automatic between DAB and FM
(DABFMLNK). When the DAB signal quality
drops significantly, it is preferred to switch and
listen to the service via FM.
Switching between DAB and FM (DABFMLNK)
can be disabled via the system settings menu.
Note: If the AF indicator is not displayed, the
radio has not found the corresponding station
in FM and can not switch from DAB to FM and
vice versa
DAB ANT
Selection of Active or Passive antenna
DAB LBND
Rotate the knob to choose DAB LBND ON or
OFF (Enable/Disable L-Band Decoding)
DAB antenna set-up
Position the antenna
- on the windscreen inside the car
- to the right of the driver for safety reasons
- on a fixed surface; avoid moving
parts such as doors, windows, etc.
- vertically and half way up the windscreen,
out of the driver's field of vision.
A detailed version of the assembly
notes is available on our website.
Please do not cut the yellow tape on the DAB
antenna.
EN-12
Characteristics
These specifications may be modified
without notice.
Frequency band: 170 - 240 MHz (Band III),
1452 - 1492 MHz (Band L), Impedance: 50 Ω
Connector type: SMB
Cable length: 2.9m