Descargar Imprimir esta página

Energenie EG-UPS-PS3000-01 Manual De Usuario página 6

Ocultar thumbs Ver también para EG-UPS-PS3000-01:

Publicidad

4
Key
combination
In the utility power mode, press "
Select the item to be set in the setting interface. After selecting the required setting, page
down to "save and exit" page. Choose "Yes", press "
In non-setting mode, momentarily press the key twice, and the LCD display content rotates.
GEMBIRD EUROPE B.V.
All brands and logos are registered trademarks of their respective owners
EG-UPS-PS3000-01 / EG-UPS-PS3000-01-S
3000VA PURE SINE WAVE UPS, LCD DISPLAY, SCHUKO, USB
Press the two keys for 3 seconds to start up.
Press the two keys for 3 seconds to shut down.
Press the setting interface for 5 seconds to restore factory settings and exit the setting
Press "
Press the key for 5 seconds to enter the setting interface.
Press the key momentarily in the setting interface to turn the page.
Press the key for 3 seconds to exit the setting interface without saving data.
In setting mode, when it goes to SAVE page, press "
"Yes", press "
In non-setting mode, press the key momentarily to turn the page (page up).
In setting mode, the parameter decreasing iterates.
In non-setting mode, press the key momentarily to turn the page (page down).
In setting mode, the parameter decreasing iterates.
In non-setting mode, press the key for 2 seconds to enter the state of automatic page
up/down and re-press the key for 2 seconds to exit the state of automatic page up/down.
3000VA PURE SINE WAVE UPS, LCD DISPLAY, USB
Function introduction
interface.
" momentarily to enable inverter mute.
" momentarily to enable the battery discharge
testing for 15 seconds.
" momentarily to save the date and
exit the setting mode.
" to complete the setting and exit the mode.
- 6 -
http://www.gembird.eu
" or "
" momentarily, choose

Publicidad

loading

Este manual también es adecuado para:

Eg-ups-ps3000-01-s