Clatronic NPS 3657 Instrucciones De Servicio página 27

File attachment
For the filing of nails
Smoothing attachment (colour)
Used for smoothing nails and removing bumps
Polishing attachment (white)
For polishing nails through circular movements
The polishing attachments are protected with foil. Please remove this foil before initial
use.
NOTE:
Wash your hands and feet or apply lotion to them only after treatment.
1. Remove the protective cover.
2. Select an attachment. If necessary, remove the attachment and fit the required
attachment onto the drive axle.
3. Turn on the device by keeping the button pressed for approx. 2 seconds.
NOTE:
The device features two power settings:
Setting 1 = minimum power
Setting 2 = maximum power
Press the button once again to go to speed level 2.
Start with the low speed setting.
4. Gently run the attachment past the treatment area.
5. In order to prevent injuries, check the progress of the treatment continuously at
short intervals.
6. Press the button again in order to stop the device.
7. Attach the protective cover. In doing so, check the position of the clip.
NPS3657_IM
Attachments
Operation
GB
27
07.07.16