Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Overview of the components
1. Spray cap
2. Front grill
3. Net clamp
4. Fan blade nut
5. Fan blade
6. Guard nut
7. Rear fan grill
8. Motor unit
9. Tightening knob
Assembly instructions
The device must be completely assembled before use! While reading the text it is advisable to
refer to the "Overview of the Components".
1. Extract all the elements of the device from the package and remove the protective film or
bags.
2. Insert the column with extension inner tube (#12) into the base (#11) and tighten the base
using the base L-bolt and metal washer (#13).
3. Put right the motor (#8) and fix it using 2 screws (#16).
4. Insert fan body (#10) into the column sliding inner tube (#12) and tighten with the
tightening knob (#9).
5. Attach rear fan guard (#7) to the motor (#8) and tighten guard lock (#6).
6. Insert fan blade (#5) into the motor shaft, then tighten the fan blade lock (#4) by turning it
anti-clockwise
7. Twist off 3 screws of spray cap (#1) aim the 3 pillars of the mist cap at the front net cover
(#2) and tighten the screws.
8. Align the back-net cover (#7) with the net clamp (#3) pressed and secured into front fan
guard (#2) and tighten the screw.
9. Insert the mist pipe into the hole in the control panel body (#10) and plug one end into the
top of the humidifier base assembly (#15) and the other into the spray cap (#1).
10. The length of the mist pipe is easily adjustable to suit your needs, fill the water tank up to
ensure the mist and spray functions works efficiently.
Instructions for use
.
10. Fan body with control panel
11. Base
12. Column with extension tube
13. Base L-bolt with metal washer
14. Misting tube
15. Humidifying base
16. Fixing motor screws
17. Remote control
18. Touch control buttons
English
3
Publicidad
Tabla de contenido
