Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
Before cleaning, ensure the base is unplugged and the kettle has cooled
completely. Empty any remaining water from the kettle.
CAUTION: Never immerse the kettle in water or other liquids.
The could cause permanent damage to the kettle.
Do not place any parts of the kettle in a dishwasher.
Wipe the exterior of the kettle and base with a damp cloth or sponge,
then dry. Do not use abrasive soaps, cleansers, or scouring pads on
any part of the kettle as it may damage the finish.
Over time, the kettle may lose the ability to reach boiling temperature.
This may be due to scaling and mineral deposits which can build up
on the inside of the kettle depending on your use and the hardness
of water in your area. When this happens, use a scale/lime remover,
following the scale/lime remover manufacturer's directions.'
STORAGE
Clean and dry all parts before storing. Store the kettle in its box
or in a clean, dry place.
Never wrap the power-supply cord around the kettle.
12
HOW TO USE
Please read this entire Safety and Maintenance manual fully before
turning on and using your kettle.
TURN KETTLE ON/OFF
To turn Corvo EKG on, press the menu button OR the dial and wait for
the screen to light up. To turn Corvo EKG off, press the dial and wait for
the screen to turn black.
SET GOAL TEMPERATURE
From the main screen when Corvo EKG is powered on, turn the dial to
change the goal temperature. Turn the dial clockwise to increase the
goal temperature. Turn the dial counterclockwise to decrease the goal
temperature.
Once you arrive at your desired temperature, stop turning the dial.
Corvo EKG will display the set temperature for a moment and then
begin heating to the desired temperature. If the kettle is ever removed
and set back on the base, the kettle will start heating to your goal
temperature right away.
IMPORTANT: If Pre-Boil is enabled, the kettle will first heat to boiling
before cooling down to your goal temperature.
Diagram D:
ON/OFF
Dial
13
Publicidad
