Echelon STRIDE-7s Manual De Instrucciones página 26

NOTE: ASSEMBLY SHOULD BE COMPLETED WITH AT LEAST 2 PEOPLE.
To install the right handrail, have one person hold
the handrail, while the other person connects the
wires from the uprights to the wires in the handrail.
With assistance, position the screen mounting base
above the console and connect the Power/Data Cable
extension wires (11) to the correlating wires coming out
of the console. Attach small fan wires from the console to
26
the screen mounting base while the base is in position.
6
Insert (4) Hex Bolts (J), (4) Spring Washers (N) and
(4) Bushings (K) up through the bottom of the
upright using the Allen Wrench (17) and tighten to
handrail. Repeat steps to install left handrail.
Carefully run the cords through the underside hole on the
screen mounting base, while simultaneously lowering the
base onto the console. Make sure there are no wires in the
way when placing the base onto the mount.